© RGS Engineering Solutions Ltd 2017
BLASFORMTECHNIK
HESTA Blasformtechnik GmbH & Co. KG Jahnstraße 84, D - 7 3 0 3 7  Göppingen, Tel: +49 (0) 7161 / 504 67-0, Fax: +49 (0) 7161 / 504 67- 2 9 www.hesta.de, info @ hesta.de
Modification reserved Standard voltage: 3 x 380V, 50 Hz Alternative centre distances possible Please ask for additional equipment The effective consumption data for Energy- and cooling requirements are product dependent. The Air requirement is an approximate value, it can change according to produced article.
• • • We reserve the right to change technical specifications without prior notice.
HESTA 460 J
Single station blow moulding machine with horizontal linear shuttle / all-electric driven-Version Width:      2230mm Length:   3420mm Depth:  4800mm
Key Data HESTA 460 J mm Linear mould Stroke A 460 Mould Width B 460 Mould Length  C 600 Mould Thickness  D 2x250 ± 3mm Opening Stroke E 360 Platen daylight  860 Clamping Force 200 kN  Dry Cycle 2,1 sec. Centre Distances  2 fold 180/200 3 fold 125/140 4 fold 85/100  6 fold 60/70  8 fold 50 Extruder ø 70 ø 80  Drive Electromotor, infi nitely variable Screw Speed min ¯ ¹ 0  80 0  80  Screw mm 70 / 22 D 80 / 22 D Energy Requirements Electrical Drives for 120 kN  kW 17,5 17,5 Electromotor Extruder  kW 30 54 Heating Capacity Extruder  kW 18,1 22,3 Electric Control, approx.  kW 2 2 Total Connected Load, approx.   kW 67,6 95,8 Air Requirement, approx. Nl/min 500/600 500/600  Air Working Pressure bar 7-10 7-10 Cooling Requirement Extruder  kJ / h 12.000 20.000 Blow Mold  kJ / h 38.000 48.000
© RGS Engineering Solutions Ltd, 2017
HESTA Blasformtechnik GmbH & Co. KG Jahnstraße 84, D - 7 3 0 3 7  Göppingen, Tel: +49 (0) 7161 / 504 67-0, Fax: +49 (0) 7161 / 504 67- 2 9 www.hesta.de, info @ hesta.de
Modification reserved Standard voltage: 3 x 380V, 50 Hz Alternative centre distances possible Please ask for additional equipment The effective consumption data for Energy- and cooling requirements are product dependent. The Air requirement is an approximate value, it can change according to produced article.
• • • We reserve the right to change technical specifications without prior notice.
Single station blow moulding machine with horizontal linear shuttle / all-electric driven-Version Width:      2230mm Length:   3420mm Depth:  4800mm
HESTA 460 J
Key Data HESTA 460 J mm Linear mould Stroke A 460 Mould Width B 460 Mould Length  C 600 Mould Thickness  D 2x250 ± 3mm Opening Stroke E 360 Platen daylight  860 Clamping Force 200 kN  Dry Cycle 2,1 sec. Centre Distances  2 fold 180/200 3 fold 125/140 4 fold 85/100  6 fold 60/70  8 fold 50 Extruder ø 70 ø 80  Drive Electromotor, infi nitely variable Screw Speed min ¯ ¹ 0  80 0  80  Screw mm 70 / 22 D 80 / 22 D Energy Requirements Electrical Drives for 120 kN  kW 17,5 17,5 Electromotor Extruder  kW 30 54 Heating Capacity Extruder  kW 18,1 22,3 Electric Control, approx.  kW 2 2 Total Connected Load, approx.   kW 67,6 95,8 Air Requirement, approx. Nl/min 500/600 500/600  Air Working Pressure bar 7-10 7-10 Cooling Requirement Extruder  kJ / h 12.000 20.000 Blow Mold  kJ / h 38.000 48.000